Slewing jib crane wall-mounted GAMMA 300
- Slewing range: 180° + 300°
- Rotation: manual
- Chain hoist: electric or manual
- Control from the cassette attached to the hoist or separately
Outreach [m]: |
1 |
2 |
3 |
4 |
5 |
WLL [kg]:
|
125 |
* |
* |
* |
* |
* |
250 |
* |
* |
* |
* |
|
500 |
* |
* |
* |
|
|
Recommended equipment. Optional:
- hoist ESW
- hoist EVW
- hoist VX
- hoist SBE
ESW
WLL: up to 500 kg
|
EVW
WLL: up to 500 kg
|
VX
WLL: up to 500 kg
|
SBE
WLL: up to 500 kg
|
|
| |
|
|
SHOW
|
SHOW
|
SHOW
|
|
Control:
Cassette control ST
- The cassette is suspended under the hoist or on a separate cable line
- For hoists with an electric trolley and cranes with an electric drive for rotation of the cassette arm with 4, 6 or 8 buttons
|
Cassette control SE
- The cassette is suspended under the hoist or on a separate cable line
- The ergonomic shape allows for safe control with one hand
|
|
|
Control with a manipulator SM
- Only VERLINDE hoists Control buttons and manipulator integrated with the load hook
- It allows for safe control and simultaneous precise
two-handed maneuvering of the hook and load
|
Control cylindrical SC
- Only KITO EDC hoists
- Steering cylinder integrated with the load hook
- It allows for safe control with one hand while maneuvering the load hook
- The handle housing contains a main and alarm switch, potentiometers determining the upper and lower limits of the lifting speed, a speed range switch and diodes indicating the device status
|
|
|
|
Arm rotation drive:
Working area limitation:
SO-C The limiter (bumper) is adjustable (option)
- Limits the movement of crane arms in hazardous areas operation of the crane, people or nearby devices and installations or makes work easier by limiting unnecessary movements arm
- Location of stops is regulated using screws and mounting holes
- Limiter can be mounted in lower or upper part arm
Rotation retarder:
SP Arm rotation decelerator (optional)
- It can only be used in the absence of an electric drive for arm rotation
- Prevents sudden or uncontrolled rotation of the arm
- Enables precise positioning of the load
- Standardly installed on all crane joints
- Principle of operation: friction with adjustable pressure force
Arm rotation lock:
SB Arm rotation lock (option)
- Allows you to securely lock the arm in the selected position
- Locking using a pin with an eye and a disc with holes at the lower yoke of the arm rotation axis
- The lock can be single-point or multi-point
- By default, the arm is locked at one point in the "straight" position
Electrical equipment:
- SG additional electrical socket at the hoist, enabling power supply of suspended devices, e.g. vacuum grippers with an electric pump (option)
Fixing of wall-mounted jib cranes:
- SD - Screwing to the supporting structure
- SF - girding - clamp on threaded rods (optional)
In the case of mounting the crane to the building structure, an analysis should be carried out taking into account the static loads transferred to the structure by the crane.
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent