Slewing jib crane wall-mounted GAMMA 200

Description
Attachments

Slewing jib crane wall-mounted GAMMA 200

Slewing range: 180°
Rotation: manual
Chain hoist: electric or manual
Trolley: electric or manual
Control from the cassette attached to the hoist or separately

Outreach [m]:		1	2	3	4	5	6	7
WLL [kg]:	125	*	*	*	*	*	*	*
	250	*	*	*	*	*	*	*
	500	*	*	*	*	*	*	*
	1 000	*	*	*	*	*	*
	1 500	*	*	*	*	*
	2 000	*	*	*	*	*

Recommended equipment. Optional:

hoist ESW with electric trolley EWE
hoist ESW with hand trolley EWP
hoist VX with hand trolley WP
hoist VX with electric trolley WE
hoist SBE with hand trolley POT


ESW+EWE WLL: up to 2000 kg	ESW+EWP WLL: up to 2000 kg	VX+WE WLL: up to 2000 kg
SHOW	SHOW
VX+WP WLL: up to 1250 kg	SBE+POT WLL: up to 5000 kg

Control:

Cassette control ST The cassette is suspended under the hoist or on a separate cable line For hoists with an electric trolley and cranes with an electric drive for rotation of the cassette arm with 4, 6 or 8 buttons	Cassette control SE The cassette is suspended under the hoist or on a separate cable line The ergonomic shape allows for safe control with one hand

Control with a manipulator SM Only VERLINDE hoists Control buttons and manipulator integrated with the load hook It allows for safe control and simultaneous precise two-handed maneuvering of the hook and load	Control cylindrical SC Only KITO EDC hoists Steering cylinder integrated with the load hook It allows for safe control with one hand while maneuvering the load hook The handle housing contains a main and alarm switch, potentiometers determining the upper and lower limits of the lifting speed, a speed range switch and diodes indicating the device status

Radio control SR Tele-Radio Panther 2.4 Ghz 16-channel system No cable connection between the cassette and the hoist or crane - remote operation possible 8-button cassette + transmitter mounted on a crane A wired control unit is included in the set in case of radio failure or operation in EM interference conditions

Cable route:

TK01 Single

TK02 Double

Control pendant suspended under the trolley

The control pendant moves independently of the carriage

Arm rotation drive:

NB manual drive
NG upper drive with gear transmission in the arm rotation axis (option)

NB	NG

Working area limitation:

SO-C The limiter (bumper) is adjustable (option)

Limits the movement of crane arms in hazardous areas operation of the crane, people or nearby devices and installations or makes work easier by limiting unnecessary movements arm
Location of stops is regulated using screws and mounting holes
Limiter can be mounted in lower or upper part arm

Rotation retarder:

SP Arm rotation decelerator (optional)

It can only be used in the absence of an electric drive for arm rotation
Prevents sudden or uncontrolled rotation of the arm
Enables precise positioning of the load
Standardly installed on all crane joints
Principle of operation: friction with adjustable pressure force

Arm rotation lock:

SB Arm rotation lock (option)

Allows you to securely lock the arm in the selected position
Locking using a pin with an eye and a disc with holes at the lower yoke of the arm rotation axis
The lock can be single-point or multi-point
By default, the arm is locked at one point in the "straight" position

Fixing of wall-mounted jib cranes:

SD - Screwing to the supporting structure
SF - girding - clamp on threaded rods (optional)

In the case of mounting the crane to the building structure, an analysis should be carried out taking into account the static loads transferred to the structure by the crane.