Freestanding jib crane ALPHA 100

Freestanding Jib Crane ALPHA 100

• Slewing range: 360°
• Rotation: manual
• Chain hoist: electric or manual
• Control from the attached cassette to hoist or separately
  

Recommended equipment. Optional:

• hoist ESW with electric trolley EWE
• hoist ESW with hand trolley EWP
• hoist EVW with hand trolley EWP
• hoist VX with hand trolley WP
• hoist VX with electric trolley WE
• hoist SBE with hand trolley  POT
• Balanser

ESW+EWE WLL: up to 1000 kg	ESW+EWP WLL: up to 1000 kg	EVW+EWP WLL: up to 500 kg	VX+WE WLL: up to 1000 kg
VX+WP WLL: up to 1000 kg	SBE+POT WLL: up to 5000 kg	Balanser WLL: up to 180 kg

Electrical equipment

(for cranes with electric hoist):

• EB1 three-phase electrical socket with rotary switch
• EB2 three-phase electrical socket with main rotary disconnector and overcurrent protection, voltage monitoring relay and activation button, mounted on an electrical box with an 8-module DIN rail for mounting modular devices of the TH35 system
• SG additional electrical socket at the hoist, enabling power supply of suspended devices, e.g. vacuum grippers with an electric pump (option)

Control:

Cassette control ST The cassette is suspended under the hoist or on a separate cable line For hoists with an electric trolley and cranes with an electric drive for rotation of the cassette arm with 4, 6 or 8 buttons	Cassette control SE The cassette is suspended under the hoist or on a separate cable line The ergonomic shape allows for safe control with one hand
Control with a manipulator SM Only VERLINDE hoists Control buttons and manipulator integrated with the load hook It allows for safe control and simultaneous precise two-handed maneuvering of the hook and load	Control cylindrical SC Only KITO EDC hoists Steering cylinder integrated with the load hook It allows for safe control with one hand while maneuvering the load hook The handle housing contains a main and alarm switch, potentiometers determining the upper and lower limits of the lifting speed, a speed range switch and diodes indicating the device status
Radio control SR Tele-Radio Panther 2.4 Ghz 16-channel system No cable connection between the cassette and the hoist or crane - remote operation possible 8-button cassette + transmitter mounted on a crane A wired control unit is included in the set in case of radio failure or operation in EM interference conditions

Ballast base:

• It consists of a steel bottom and top plate and concrete ballast modules
• The number of modules is selected depending on the load capacity and reach
• Detachable base, facilitating assembly, transport and possible expansion
   

Mounting methods:

• MB ballast - a crane not attached to the ground
• Mobile (without load) when equipped with a wheelset
• Support - adjustable swing feet
• Requires a hard, stable surface

Arm rotation drive:

NB manual drive

• Arm rotation caused by manual movement of a load or load chain
   

Working area limitation:

SO-A fixed arm rotation limiter (bumper), screwed to the column during crane assembly

• Limits the movement of crane arms in zones dangerous to the operation of the crane, people or nearby devices and installations
• After analyzing the hazards and working conditions, the limiters are installed "permanently" in a way that prevents quick or accidental disassembly
• Additional fixed stops (bumpers) are mounted at the ends of the working part of the arm, limiting the movement of the trolley along the arm

SO adjustable limiter (option)

Rotation retarder:

SP Arm rotation decelerator (optional)

• It can only be used in the absence of an electric drive for arm rotation
• Prevents sudden or uncontrolled rotation of the arm
• Enables precise positioning of the load
• Standardly installed on all crane joints
• Principle of operation: friction with adjustable pressure force

Arm rotation lock:

SB Arm rotation lock (option)

• Allows you to securely lock the arm in the selected position
• Locking using a pin with an eye and a disc with holes at the lower yoke of the arm rotation axis
• The lock can be single-point or multi-point
• By default, the arm is locked at one point in the "straight" position